The Fitjet nozzle very clearly increases the force of impact in comparison with a flat jet (see link impact force table in chapter nozzle concept). That allows a reduction of important water consumption (from 10% to 30%).
THE WORKING TIME
Thanks to the force of impact raised, the efficiency is increased
That also contributes to a water saving.
THE ENERGY COSTS
(heating of water, motors for the boosters)
The water and time savings reduce as much energy costs related on the heating of water, on the working and the power of the engines of the pumps, on cleaning time saving.
The demand of water being decreased, the direct costs are reduced in the same proportion (water, energy for heating and for engines, waste water).
That allows a very quick return on investment of the Fitjet purchase.
The increase in the temperature of water is possible without additional cost (investment and energy).
THE PRESSURE EQUIPMENT
The potential of the medium pressure pumps increases because the reduction of the water consumption makes it possible to raise the number of operators or to install systems of automatic washing simultaneously.
The insufficient pressure can be appreciably increased. Thus the effectiveness of washing is clearly improved.
The investment of equipment can be reduced because the required instantaneous flow rate is lower.
The capacity of the pumps already installed is increased. That can avoid an additional investment in the event of development of cleaning (a number of operators, automatic systems of washing…).
TO OPTIMIZE - TO REDUCE
MEDIUM PRESSURE INSTALLATION
Medium pressure rotating nozzle working at 10 to 50 bars.